INSTRUCTIONS

INSTRUCTIONS FOR UV DTF APPLICATION 

  • Place wrap and measure around cup to check fit, trim excess if necessary
  • Peel backing off of the design (white backing) 
  • Place the design onto your cup-starting with center and working your way out by pressing with your fingers making sure you have no bubbles - be careful to place exactly where you want it to go as you will not be able to remove once placed. The adhesive is extremely strong-you want to be sure of location prior to adhering to cup. **Suggestion is to mark center on cup and top film 
  • Make sure to rub all over the design prior to peeling off the clear film on top. 
  • Peel the clear film off and you have a beautifully designed cup! 

Marcourt Transfers is not responsible for placement errors or washing errors; COLORS MAY VARY DUE TO SCREENS AND COMPUTERS

 

DIRECT TO FILM TRANSFERS (shirts bags n more) 

Commercial Heat press is Recommended 

  • Temp: 285-300 degrees/ Heavy Pressure 
  • Press Time: 15-20 Seconds
  •  Press first time for 15-20 seconds w a Teflon sheet on top or parchment paper
  • Peel once pressed
  • place Teflon or Parchment paper back on top of transfer and press an additional 5-10 seconds

While all Dtf have a certain feel to them; this will vary depending upon how much ink is in the actual print and how much free space there is.  A more soli print has more ink therefore will feel sturdier while a print that has more vacant free space will feel lighter. It is the nature of the DTF Print. 

** All instructions are a recommendation. It is best to know your heat press and what settings work for you. Marcourt Transfers is not responsible for print/pressing errors. So, it is best to purchase a smaller print to practice on and learn your heat press. 

CRICUT EASY PRESS 

  • Temp: 320-350 degrees / Heavy Pressure 
  • Press Time: 30-45 Seconds 
  • Cold Peel- then cover W Parchment or Teflon sheet and press for 3-5 more seconds

For Best Results a commercial heat press is recommended. While and iron or Cricut Easy press will work, MarCourt Transfers is not responsible for damages or outcome after using an iron or Cricut Easy press.